Coal Pellet Machine
.jpg) |
Introduction of briquette making machine for coal pellets
briquette making machine for coal pellets is used to process different powder below 3 mm into
briquettes such as pillow shape, oval shape, egg shape, ball shape, column shape and so on.
These powder can be widely including coal powder,coal slurry,coal dust,iron powder,charcoal
powder,coke powder, aluminum,gypsum,sludge,kaolin and other powders.
The main consist parts Structure consists of three parts: the feeding part, transmission part and molding part.
(1).Feeding part achieve dosing feeding to ensure access to the material evenly between the rolls.
(2).Transmission part, main drive system are: motor--triangle belts--reducer--open gear--roller.
(3).Forming part, mainly refer to host part of machine and the core part is the roller.
Working principle
Through reducer simultaneously transmitted the power to two pressure rollers and made them rotated in
opposite directions.In two pressure rollers rotation,materials naturally enter into the ball molds on pressure
roller and materials pressure vary from small to large with the rotation of the pressure roller. When the
material is rotated to two rollers line contact points,materials pressure has reached a peak.Under enormous
pressure,the powder materials are suppressed into finished ball
The finished products 1.Shape: The finished products pressed by briquette making machine for coal pellets are diversified,pillow shape,oval shape,egg shape, ball shape, column shape and so on. height. 3.Transport: It is very easy and convenient to transport either short transport or long transport.
2.Hardness: The finished product are very hard,they are not shattered even though down from 3 meters
