Product center
Working Principle of Scrap Copper Wire / Cable Granulator , Scrap copper wire recycling machine
Working Principle of Scrap Copper Wire / Cable Granulator , Scrap copper wire recycling machine
This is about the Working Principle of Scrap Copper Wire / Cable Granulator , Scrap copper wire recycling machine. We Henan Yuxi MACHINERY EQUIPMENT Co.,Ltd . We are in China , we also have many machines like the Working Principle of Scrap Copper Wire / Cable Granulator , Scrap copper wire recycling machine .If you fell that the Technical parameters for the Working Principle of Scrap Copper Wire / Cable Granulator , Scrap copper wire recycling machine is well, please contact with us .
Working Principle of Scrap Copper Wire / Cable Granulator , Scrap copper wire recycling machine :
After the separation equipment to complete the cable broken in the process of copperand plastic separation and recovery.Equipment production pattern,good dust removal
equipment,production is controlled by a control box.Successful development of the
machine solved the pollution caused by burning take copper.Not only improve the quality
of the recovery of copper effect,and has the advantages of recycled plastics.
When directly put into the machine, used cable is cut into granules first, during this process, copper and plastic is separated but mixed together, then the granules are sent to vibration device for separation,through wind blow and vibration, the copper and plasticis are separated, then pure copper comes out from one side and pure plastic comes out from the other side, we collect the separated pure copper and plastic at last!
1)Materials are crushed in the crusher to have plastic skin and copper granules;
2)The crushed materials (mixture of copper and plastic) are conveyed to the separator by the conveyor, during which procedure the plastic granules (including fiber, rope, or tapes, etc. mixed in the wires) are cleaned by the dust cleaner.
3)The separator is consist of separating board, eccentric device, adjustable amplitude device,and speed adjustable motor, etc. It is used to separate plastic and copper.
4)All units are installed on the underbed to form a whole structure, easy for transportation. The machine is adjusted ready for production before shipment, and customer only need to connect it to the power supply.
For more information , please login : http://www.yuximachine.com
E-mail : zhengzhouyuxi@yuximachine.com
Mibile : 0086-13674998188
