The Things Before Determining Baler Location
If you are choosing the location for installing a new cardboard baler, and want to build up a more streamlined recycling process, you need to consider some factors which can help you.
Tips to Think About When Choosing Baler Location
Here are some tips you need consider before determining cardboard baler machine location.
1.Check the baler’s overall dimensions before the installation. Need sufficient space for fitting the baler especially the height factor because some rooms and facilities have height limitation.
2.Make sure the ground material is firm enough to support and fix the balers as baler machines are very heavy, and usually need to be bolted to the ground. The concrete floor is widely accepted for placing the bale machine.
3.Consider adequate space for material loading, forklift moving, space for bales ejecting out from the cardboard compactor, etc.
4.Check the temperature of the area to place the baling machines. If the ambient temperature is below freezing point, the baler needs to be equipped with oil heater.
5.Need sufficient space around the baler for easy operation and maintenance. For cardboard recycling machine with hydraulic station on the machine top, consider higher space than the machine overall height, thus you can climb up for maintenance.
6.Consider adequate space for material loading, forklift moving, space for bales ejecting out from the baler, etc.
7.Consider if there is enough space for accessory devices which need to be connected to the baler such as feeding conveyor, bale exit chute, etc.
8.Place the baler close to the material storage area or a convenient place where operators can quickly access to the material that needs to be baled.
Yuxi Can Help You Solve Baler Location Problem
Yuxi can help you solve the problems all above about cardboard press. Moreover, we can offer the site selection guide and best after-sales service. Contact us now and our engineers will help tailor a solution, best fit to your needs.
